home *** CD-ROM | disk | FTP | other *** search
- Path: news.sinet.slb.com!usenet
- From: bar@canuck.englewood.geoquest.slb.com (Bernhard A. Rieckhoff)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: AdSpeed jumpers
- Date: 1 Apr 1996 15:11:43 GMT
- Organization: Schlumberger
- Message-ID: <4jornf$aus@ohnasn01.sinet.slb.com>
- References: <5XGKlgu.lmcclure@delphi.com> <4jkacd$64t@blackice.winternet.com>
- NNTP-Posting-Host: 163.185.53.83
- X-Newsreader: knews 0.9.3
-
- In article <4jkacd$64t@blackice.winternet.com>,
- sftracy@winternet.com (Scott F Tracy) writes:
- >Lonnie McClure (lmcclure@delphi.com) wrote:
- >: A simple request: Can someone post the functions of the A-B and C-D jumpers
-
- SNIP..
-
- >A-B determine speed if they are NOT conected adspeed starts at 14mhz
- >if conected adspeed starts a 7mhz and you need to use software to get 14mhz.
-
- SNIP
-
- Just a note, I never got the A-B thingy to work, nor did anyone else I
- knew. I just put Adspeed very early in my startup-sequence.
-
- --
- PLEASE REPLY TO: brieckhoff@houston.geoquest.slb.com
- Bernhard Rieckhoff Sr. Geophysicist, Schlumberger-GeoQuest
- Denver, CO USA Voice (303) 486-3204 FAX (303) 694-4690
- *Opinions expressed here are unlikely to reflect those of my employer*
-
-